Brother MFC-J6510DW Guida Utente Scaricare il pdf (Pagina 103)

Troubleshooting

95

B

Dial Tone detection B

When you send a fax automatically, by

default your machine will wait for a fixed

amount of time before it starts to dial the

number. By changing the Dial Tone setting to

Detection you can make your machine dial

as soon as it detects a dial tone. This setting

can save a small amount of time when

sending a fax to many different numbers. If

you change the setting and start having

problems with dialling you should change

back to the factory No Detection setting.

a Press Menu.

b Press a or b to choose

Initial Setup.

Press OK.

c Press a or b to choose Dial Tone.

d Press d or c to choose Detection or

No Detection.

Press OK.

e Press Stop/Exit.

Telephone line

interference / VoIP B

If you are having problems sending or

receiving a fax due to possible interference

on the telephone line, you can change the

compatibility setting, which reduces the

modem speed to minimise errors.

a Press Menu.

b Press a or b to choose

Initial Setup.

Press OK.

c Press a or b to choose

Compatibility.

d Press d or c to choose High, Normal or

Basic(for VoIP).

 Basic(for VoIP) cuts the

modem speed to 9,600 bps and

turns off colour fax receiving and

ECM, except for colour fax sending.

Unless interference is a recurring

problem on your telephone line, you

may prefer to use it only when

needed.

To improve compatibility with most

VoIP services, Brother recommends

changing the compatibility setting to

Basic(for VoIP).

 Normal sets the modem speed at

14,400 bps.

 High increases the modem speed to

33,600 bps. (factory setting)

Press OK.

e Press Stop/Exit.

Note

VoIP (Voice over IP) is a type of phone

system that uses an internet connection,

rather than a traditional phone line.

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 150 151

Commenti su questo manuale

Nessun commento