Brother HL 2270DW Manuale Utente Scaricare il pdf

Start Here

HL-2135W / HL-2270DW /

HL-2275DW

Quick Setup Guide

ENG Version 0

Before using this machine for the first time, read this Quick Setup Guide to setup and install your machine.

To view the Quick Setup Guide in other languages, please visit http://solutions.brother.com/.

Unpack the machine and check the components

WARNING

• Plastic bags are used in the packaging of your machine. Plastic bags are not toys. To avoid danger of

suffocation, please keep these bags away from babies and children and dispose of them properly.

Note

Not all models are available in all countries.

WARNING

indicates a potentially hazardous situation which, if not avoided,

could result in death or serious injuries.

CAUTION

indicates a potentially hazardous situation which, if not avoided, may

result in minor or moderate injuries.

Quick Setup Guide Safety and Legal

Booklet

Documentation/

Installation CD-ROM(s)

AC Power Cord Drum Unit and Toner Cartridge Assembly

(pre_installed)

Note

• Keep a minimum gap around the machine as shown in the illustration.

• We recommend that you save the original packaging.

• The components included in the box may differ depending on your country.

• If for any reason you must ship your machine, carefully repack the machine in the original packaging to

avoid any damage during transit. The machine should be adequately insured with the carrier. How to repack

the machine, see Packing and shipping the machine in the User’s Guide.

• The illustrations in this guide show the HL-2270DW / HL-2275DW.

•

The interface cable is not a standard accessory. Buy the appropriate interface cable for the interface you want to use (USB or Network).

USB cable

It is recommended to use a USB 2.0 cable (Type A/B) that is no more than 2 meters (6 feet) long.

Network cable

Use a straight-through Category5 (or greater) twisted-pair cable for 10BASE-T or 100BASE-TX Fast Ethernet Network.

100mm(4 in.)

100mm

(4 in.)

100mm

(4 in.)

120mm

(4.72 in.)

1 2 3 4 5 6 ... 34 35

Sommario

Pagina 1 - Start Here

1Start HereHL-2135W / HL-2270DW / HL-2275DWQuick Setup GuideENG Version 0Before using this machine for the first time, read this Quick Setup Guide to

Pagina 2 - Remove the packing

10Windows®Wired NetworkFor Wired Network Cable Users for Windows® (For shared network users) (HL-2270DW and HL-2275DW only)6Before you installa Client

Pagina 3 - Load paper in the paper

11Windows®Wired NetworkWindows®Macintosh Wired Networkd Follow the on-screen instructions to complete setup.FinishThe installation is now complete.Not

Pagina 4 - Print a test page

12MacintoshWired NetworkFor Wired Network Cable Users for Macintosh (HL-2270DW and HL-2275DW only)6Before you installa Make sure your machine is plugg

Pagina 5 - For Wireless Network

13MacintoshWired NetworkWindows®Macintosh Wired Networkd When this screen appears, click Next. NoteWhen the Brother Support screen appears, make your

Pagina 6 - Install the printer driver

14For Wireless Network UsersFor Wireless Network Interface Users6Before you beginFirst you must configure the wireless network settings of your machin

Pagina 7

15For Wireless Network UsersWireless NetworkWindows®Macintosh 7Confirm your network environment (Infrastructure Mode)The following instructions will o

Pagina 8 - TCP/IPTCP/IP

16Windows®Wireless NetworkConfiguration using the automatic wireless (one-push) method8Configure the wireless settings and install the printer drivera

Pagina 9

17Windows®Wireless NetworkWireless NetworkWindows®Macintosh h Press the wireless setup button located at the back of the machine for less than 2 secon

Pagina 10 - Wired Network

18Windows®Wireless NetworkConfiguration in Infrastructure mode, temporally using a USB or Ethernet (LAN) cable8Configure the wireless settings and ins

Pagina 11

19Windows®Wireless NetworkWireless NetworkWindows®Macintosh h Choose Temporarily use a USB cable (Recommended) and then click Next. i Temporarily conn

Pagina 12 - Macintosh

22Remove the packing material from the machinea Remove the packing tape from the outside of the machine and the silica gel pack from the face-down out

Pagina 13

20Windows®Wireless Networkn If the confirmation screen appears, check the box and click Next. When the following screen appears, check Yes if you want

Pagina 14 - For Wireless Network Users

21Windows®Wireless NetworkWireless NetworkWindows®Macintosh t A wireless LAN report will automatically be printed. uChoose the status as it is shown f

Pagina 15

22MacintoshWireless NetworkConfiguration using the automatic wireless (one-push) method8Configure the wireless settings and install the printer driver

Pagina 16 - Wireless Network

23MacintoshWireless NetworkWireless NetworkWindows®Macintosh j The machine LED's will indicate the connection results. See LED indications when u

Pagina 17

24MacintoshWireless NetworkConfiguration in Infrastructure mode, temporally using a USB or Ethernet (LAN) cable8Configure the wireless settings and in

Pagina 18

25MacintoshWireless NetworkWireless NetworkWindows®Macintosh i Choose Temporarily use a Ethernet (LAN) cable and then click Next.j Remove the protecti

Pagina 19

26MacintoshWireless Networkn If your network is not configured for Authentication and Encryption, the following screen will appear. To continue config

Pagina 20

27MacintoshWireless NetworkWireless NetworkWindows®Macintosh u (For USB cable users) Disconnect the USB cable between the computer and the machine.(Fo

Pagina 21

28For Wireless Network UsersTroubleshootingHow can I find the wireless settings SSID and Network Key* The Network Key may also be described as the Pas

Pagina 22

29For Wireless Network UsersWireless NetworkWindows®Macintosh TS-04The Authentication/Encryption methods used by the selected WLAN access point/router

Pagina 23

33Load paper in the paper traya Pull the paper tray completely out of the machine.b While pressing the green paper-guide release lever, slide the pape

Pagina 24

30For Wireless Network UsersTS-07The machine cannot detect a WLAN access point/router that has WPS or AOSS™ enabled.If you would like to configure you

Pagina 25

31For Network UsersWeb Based Management (web browser)The Brother print server is equipped with a web server that allows you to monitor its status or c

Pagina 26

Other Information32Printer LED Indications1The LED will blink ON and OFF at 1 second intervals.2The LED will blink ON and OFF at 0.5 second intervals.

Pagina 27

33Other InformationLED indications when using the one-push wireless setting mode1The LED will blink (turn on for 0.2 seconds and off for 0.1 second).2

Pagina 28

Consumables34ConsumablesWhen the time comes to replace consumable items, an error will be indicated by the LED's on the control panel. For more i

Pagina 29

TrademarksThe Brother logo is a registered trademark of Brother Industries, Ltd.Brother is a registered trademark of Brother Industries, Ltd.Microsoft

Pagina 30

44Print a test pagea Connect the AC power cord to the machine and then connect it to an AC power outlet.b Turn on the machine power switch.c After the

Pagina 31 - For Network Users

5Windows®USBMacintosh Windows®Macintosh Wired NetworkWireless NetworkWindows®Macintosh 5Choose your connection typeFor USB Interface UsersWindows®, go

Pagina 32 - Other Information

6Windows®USBFor USB Interface Cable Users for Windows®6Before you installa Make sure that your computer is ON and you are logged on with Administrator

Pagina 33

7MacintoshUSBWindows®USBMacintosh For USB Interface Cable Users for Macintosh6Before you installa Make sure your machine is plugged in and your Macint

Pagina 34 - Consumables

8Windows®Wired NetworkFor Wired Network Cable Users for Windows® (For Peer-to-Peer network users) (HL-2270DW and HL-2275DW only)6Before you installa R

Pagina 35 - Copyright and License

9Windows®Wired NetworkWindows®Macintosh Wired Network7Install the printer drivera Put the installation CD-ROM into your CD-ROM drive. If prompted, sel